Hard Wood Floor Refinishing
Refinishing hardwood is such a big task. And the fist thing to do is remove all baseboards, furniture, and other materials from the room. It is also recommend to remove curtains or any other fabric as the work will generate a lot of sanding dust. Empty the cabinets and closet, even if there is no plan to refinish the closet floor.
Home owner need to make sure they either have a subfloor underneath the hardwood, or a very thick hardwood floor that it can really handle being thinned a bit. Once a floor is very thin, home owner's chance cracking boards in the future when they move heavy furniture around.
The first thing a home owner that will refinished their home needs is a drum sander. Check at a local equipment and hardware rental stores. Make sure to get a sander that runs on 110 current for much easier to use. The sander really doesn't need much strength to operate, but owners constantly lift up on the handle to put and apply the sander to the floor, so the owner's forearms and lower back are likely to get painful and sore if they are out of shape like me.
When a nice hardwood floor is sanded and also coated with layers of protective varnish or urethane, it can withstand and tolerate a considerable amount of abuse.
Home owners actually walk on the clear finish, not the wood it self. Dust and very small dirt and grit particles are a nice floor finishes' worst enemy. As people walk across a hardwood floor that is slightly dirty their feet act as sanding pads. If the grit particles are very large enough, they will actually scratch the finish. Over time, common or normal foot traffic can and will eventually erode the layers of clear finish exposing bare wood. This is to be prevent and avoided at all costs if possible.
The good news is that owners can restore the hardwood floor how many times they want. The even much better news is that dust can be prevented and kept to a minimum and possibly eliminated it completely. Because the clear finish on floors has yet to wear through to the nice wood, owners have 2 choices. Find sand hardwood floor, hardwood floor finish repair, wood floor staining, staining hardwood floor, hardwood floor staining, how to sand wood floors, hardwood floor scratch remover floor refinishing without sanding.
The traditional method used for many years by excellent professional hardwood floor refinishes is screening. A very low speed buffing machine, and equipped with a special pad, lightly scuffs the clear coat. The scuffing restore/removes minor imperfections and prepares the floor so the improved and new coat of urethane will adhere.
Many consumers search refinish tutorials and how-to-do when bare or worn or spots begin to appear, or some scratching has become too much to handle in a nice wooden floor. In some instances and cases a color change is wanted and desired, or many just may want to renew and change the sheen level of the finish, or even convert from a waxed finish flooring into a less troublesome maintenance free type floor finish.
Some customers may say when to have the work done? well it all depends on their expectations. While most or general of people can live with the everyday abuse wood floors get as dings, scratches, and dents lead to adding such character, others want and prefer that sleek contemporary look. In that case, refinishing every 5 years may suit their needs.
Refinishing a hard wood floor is a nice and great way to increase the value of a living space. Sometimes, a floor with shallow dents and scratches or a dull surface only needs a top coat of finish. Sometimes, refinishing isn't perfect and enough and whole boards need to be changed and replaced. If the floor feels sags, spongy, or if floor boards are warped, then consumer may consider replacing them.
If some scratches are in the wood, refinishing is the next best step. However, a hard wood floor can only be refinished so many times because each refinishes sanding takes off more wood. Check at floor edges or even around a heat register to see how much hard wood still remains.
Whether a consumer had wood floors for a very long time or just newly discovered them under old carpeting, they probably may want and considered refinishing them. Waxing and also buffing often give and provide a good shine, but refinishing the whole floor is usually the only way to renew and regain the original beauty and richness of the wood.
Refinishing is a very hard work to be done and some people opt to get and hire a professional. But most of the necessary tools and equipment is available at some rental centers and the steps are pretty clear and straightforward. Thus this means that anyone can also do refinishing at their own.